PPR (Plaster)

Product Description:

"MYMIX - PPR (Plaster)" is a strong durable pre-mixed powder/render with high quality polymer additives suitable for plastering over all types of concrete surfaces (old or new), clay bricks, fly ash bricks and ACC blocks. It is normally applied to masonry interiors and exteriors to achieve a smooth and even surface. "MYMIX - PPR (Plaster)" contains processed and fine graded sand which gives better quality of plaster.

Advantages:

  • Under coating and plastering over existing concrete and brick/block walls
  • Use as a leveling plaster for correction of surface undulation in bare concrete block and other cementitious substrates
  • Basic leveling of concrete, light weight blocks and bricks
  • Filling holes and irregularities, leveling walls and ceilings
  • Create a leveled surface from uneven masonry or concrete wall
  • Least rebound loss in comparison to traditional plastering
  • Minimizes cracking & shrinkage free
  • Saves both manpower & time with better work yield per day

Suitable Substrates:

  • Masonry Wall
  • AAC Block wall
  • RCC wall surfaces

How to Apply:

  • Surface should be cleaned by removing Dirt, soil and roof runoff stains
  • Start at the top and wash the dirt (pre‐wetting of surface) down the wall before applying plaster
  • Proper hacking is to be done prior to application in concrete surface
  • Take 5 to 5.5 litre of water on a bucket and gradually add MYMIX‐ PPR (25 kg) in it. Approx. ration 20 – 22% by weight
  • Mixing can be done manually or by electrical stirrer (for better result) till homogenous mix is obtained.
  • After proper mixing leave the paste for 5 to 10 minutes for polymeric dispersion before application
  • Use mixture within 1 hour of preparation of mix. Hard & set plaster should not be mixed again
  • Correct ratio of water and PPR is essential for better results

Technical Details (As per IS 4031)

S . NoTesting ParameterSpecification
1PPR – Mixing Ratio5.0 to 5.5 litre water for 25 kg Material Approx: 20 – 22 % by weight
2Product ColourGrey
3Compressive Strength in Mpa
3.1After 07 days5.47 Mpa
3.2After 28 days8.19 Mpa
4Loose bulk density1.51 gm/cc
5Wet density2.08 gm/cc

Packing:

  • 25 kg bag and Project packing of 40 kg bag is available on demand

Shelf Life:

  • Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.