UTA (Universal Tile Fixing Adhesive)

Product Decription:

  • "MYMIX – UTA (Universal Tile Fixing Adhesive)" is a Cementitious ready mix which is a thin bed polymer modified tile adhesive
    for interior and exterior application. Its unique properties make it ideal for fixing ceramic tiles, vitrified tiles, natural stones and granite to most building substrates


  • Specially for interior & exterior floors and walls installations
  • All types of tiles and stone


  • Easy to Apply, Single component adhesive
  • More open time
  • Dual purpose for floor and wall with good adhesion workability

Suitable Substrates:

  • Concrete wall and floor area
  • Brick Masonry
  • Cement mortar beds

  • High Shear Bond Strength
  • Superior adhesion for porcelain and vitrified tiles

  • Tile‐on‐tile application
  • Cement Plaster
  • Thin-set Cementitious Screeds

How to apply:

  • Add 25 kg of “MYMIX‐UTA (Universal Tile Fixing Adhesive)” to approx. 6.5 to 7.5 liters Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture
  • After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel
  • Press the tiles within 15 to 20 minutes with a shuffling movement onto the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints
  • The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling.
  • New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling
  • Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be
    filled after minimum 24 hours

Technical Detail: (As per IS 15477 & ANSI 118.4)

S.NoTesting ParameterSpecification
1UTA – Mixing Ratio6.5 to 7.5 Liter water for 25 kg Material Approx: 25–30% by weight
2Product ColourGrey
3WorkabilityEasy mixing and Self curing
4ApplicationEasy application
5 Open Time @ 23–270c30 – 45 minutes
6Pot Life 4 hours
7Setting Time 24 hours
8Trafficable Time24 hours
9Coverage for 3 mm bed thickness65 – 75 Sq – Ft / per 25 kg bag
10Shear Adhesion:
ADry Condition after 24 hrs4.6 KN
BDry Condition after 14 days20.50 KN
CHeat Ageing Condition14.60 KN
DWet Condition13.50 KN
11Tensile Adhesion
ADry Condition2150 N
BWet Condition2000 N


  • 25 kg bag and Project packing of 40 kg bag is available on demand


  • Available in Grey & White

Shelf Life:

  • Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area