Cementitious Waterproofing System

packagePacking : 1 kg & 10 kg

RITESEAL® (Cementitious Waterproofing system) is a cementitious based single component, highly polymer modified, flexible waterproof coating for all kind of cementitious surfaces. It has good water resistance properties against water under hydrostatic pressure (up to 2 bar). It is to be mixed with water and applied by paint brush.

  • EN 14891 CM OP
  • Excellent adhesion to cement surface
  • Highly effective for positive & negative sides of hydrostatic pressure
  • Smooth and creamy slurry, easy to apply
  • Excellent waterproofing and crack bridging ability
  • Good water impermeable water property
  • Very good UV resistance
  • Positive side permeability: 2 bar
  • Negative side permeability: 1.5 bar

  • Suitable for swimming pools and aqua storage waterproofing
  • Waterproofing of toilets, bathrooms and sunk areas,
  • Suitable for cement based basements
  • Waterproofing of overhead, underground water tanks and reservoirs
  • Suitable roof and slabs
  • Suitable for dam, water towers, reservoirs and channels
  • Also applicable for AAC blocks and cement boards
  • Suitable as a cementitious waterproof coating for new and old surface

Cement screed

All cementitious plastered surface

Concrete structures

Interior and exteriors wet areas

Testing Parameters Result
Appearence Grey Colour Powder
Mixing ratio 40 to 45 % by weight
Pot life @ 23°- 27° c 2 hour
Hydrostatic Permeability 2 bar
Dry film thickness Approx. 1.5 to 2.0 mm
Adhesion to concrete >1.2 N/mm²
Initial tensile adhesion strength 1.6 N/mm²

Approx. 60 - 75 sq. ft. / 10 kg bag by brush application for two coats

Factory sealed packs are best before 12 months from the date of manufacturing in unopened condition and stored in cool & dry area.