MYMIX SEALER 210
MYMIX Sealer 210 is a liquid with specialized formulation (water based) to seal the porosity of all types of concrete surfaces. MYMIX Sealer 210 has unique water repellent properties that acts as invisible barrier and provides resistance to moisture and reduce staining, effect of efflorescence, while allowing vapour to escape.
- Acts as a penetrating sealer
- Preserves the natural look
- Ready-mix & easy to use
- U. V. transparent and non-yellowing
- Can be applied on Interior and exterior surfaces
Method of Application:
- Clean the surface with a dry cloth and start applying the sealer with the help of a normal paint brush or with cotton cloth with strokes in single direction covering the surface uniformly.
- Allow the surface to touch dry before application of the second coat. The time between two coats should be approx 15-30 mins. After the second application allow the surface to dry again naturally.
- Clean excess sealer from the concrete surface or stone with the help of a dry cotton cloth. If needed buffing has to be done.
- Protect the surface for curing, taking care that no traffic is allowed on the floor area till the prescribed time limit which is 24 to 72 hrs for curing.
Working and Physical Properties:
|S . No||Testing Parameter||Test Result|
|2||PH||8 - 10|
|3||Specific Gravity||1gm / ml|
|4||Coverage||65 to 75* sqft per litre per two coat|
*Coverage may vary depending on porosity of surface
Area of Application:
- All kinds of natural stones, marbles, granites, limestone, bricks and concrete products.
- Available in 500m1, 1 Liter, 5 Liter, 20 Liter.
- Bigger packingsizes are available on request.
- Best before 12 months from the date of manufacturing, in unopened condition and stored in dry area.
- Avoid directsun light.
- Approx. 65 to 75 sq. ft. per litre (two coats).